Fig 3-20 Duplex Pinch Roller - Xerox DOCUPRINT N4525 Service Quick Reference Manual

RRP 3-14 Duplex Pinch Roller (PL 14.5)

Fig 3-20 Duplex Pinch Roller

Removal
1.
Remove the Inner Chute Assembly (RRP 3-15).
2.
Working from the front of the Chute, use the flat blade of a screwdriver to
carefully free the arms of the roller latch from the Inner Chute (see the figure),
while pressing out on the rubber roller
3. Repeat step 3 for each of the remaining two rubber rollers on shaft.
4.
Remove the Pinch Roller from the Inner Chute.
5.
Repeat steps 3 through 5 and remove the other two Pinch Rollers attached to
the Inner Chute.
Replacement
1.
Open the Inner Chute.
2.
Reinstall the Pinch Roller.
3.
Rotate the three roller latches on each Pinch Roller shaft so the bow of the
latches face down and the arms of the latches face up.
4.
Press each latch into the Inner Chute until they snap into place.
5.
Rotate the Pinch Roller to make sure it rotates smoothly.
6.
Press and release the Pinch Roller to make sure it has a spring-action return.
7.
Repeat steps 2 through 6 for each of the other two Pinch Rollers.
8.
Reinstall the Inner Chute Assembly (RRP 3-15).
S4525-265
Volume 3 / Duplex Unit - FRU RRPs 3-539