Removal And Replacement Procedures (Rrp); Preparation - Xerox DOCUPRINT N4525 Service Quick Reference Manual

Removal and Replacement Procedures
(RRP)
This section contains the removal and replacement procedures for major parts within the
printer Finisher (Finisher).

Preparation

Before you begin any Removal and Replacement Procedure:
1.
Switch OFF the printer power.
2.
Disconnect the AC power cord from the wall outlet.
3. Remove the EP Cartridge and cover it with a dark cloth or place it in a sealed
container to protect it from exposure to light.
4.
Wear an electrostatic discharge wrist strap to protect sensitive printer parts
from damage.
Work Notes
Names of parts that appear in the RRPs may not be exactly the
Note
same as the names appear in the parts list. For example, an RRP
for the Multi-sheet Bypass Feeder Tray Assembly may appear on
the parts list as Tray Assembly, Multi-sheet Bypass Feeder.
Always reinstall the correct type and size screws. Using the
Caution
wrong screw can damage tapped holes. Do not use excessive
force to either remove or install a part.
Volume 6 / Finisher - RRPs 6-713