Error Codes And Messages; Error Messages; Service Flowchart - Xerox DOCUPRINT N4525 Service Quick Reference Manual

Error Codes and
Messages

Error messages

The Control Panel displays error codes when it encounters certain system failures or
anomalies otherwise undetected by the user. These error codes are discussed in this
section. When an error code first occurs, cycle power on the printer to see if the error
recurs.
For Printer Performance problems, go to the Error Codes and


Troubleshooting sections of Book I, Volume 1 of this QRG.
For Image Quality problems, go to the Troubleshooting section of Book I,


Volume 1 of this QRG.
For High Capacity Feeder problems, go to the High Capacity Feeder section


in Book II, Volume 2 of this QRG.
For Duplex Module problems, go to the Duplex Module section in Book II,


Volume 3 of this QRG.
For Envelope Feeder problems, go to the Envelope Feeder section in Book II,


Volume 4 of this QRG.

Service Flowchart

A Service Flowchart that outlines one possible approach to
Note
troubleshooting and repair of the printer has been provided. The
Service Flowchart is an overview of the path a service technician
could take, using this technical manual, to service the printer
engine and options.
To use the Service Flowchart, start at Block 1 to identify the problem. After you have
identified the problem, return to the Service Flowchart and proceed to Block 2 where you
inspect and clean the printer (a through cleaning frequently solves many printer
problems). You continue down the Flowchart in this manner, always returning to the next
block in the Service Flowchart after you have completed the tasks outlined in the current
block.
If you choose not to use the Service Flowchart, it is recommended that you start at the
appropriate Repair Analysis Procedure (RAP) Table and proceed from there.
Volume 6 / Finisher - Error Codes & Messages 6-651