Xerox DOCUPRINT N4525 Service Quick Reference Manual page 31

Tray 3 Paper Path Components
The High Capacity Feeder Tray 3 Paper Path is made up of a number of transport rollers
and paper sensors.
1.
Tray 3 Assembly
Holds plain paper of various sizes. Slides into the top feeder, Feeder 3, of the
High Capacity Feeder.
2.
Tray 3 Lift Motor
Raises the tray bottom plate so the paper contacts the Feed Roller.
3.
Tray 3 No Paper Sensor
Notifies the Print Engine Controller Board when there is no paper present in
Tray 3.
4.
Tray 3 Paper Level Sensor
Monitors the level of paper in Tray 3.
5. Tray 3 Paper Size Sensor
Monitors the size of paper that is loaded into Tray 3.
6.
Tray 3 Feed Clutch
Transmits High Capacity Feeder Motor drive to the Tray 3 Feed Roller and Pick
Roller
7. Tray 3 Pick Roller
Drives the top sheet of paper into the Feed Roller.
8.
Tray 3 Feed Roller
Drives the top sheet of paper out of Tray 3 and into the Tray 2 Take Away Roller
area of the base engine.
9.
Tray 3 Take Away Sensor
Monitors paper travel from the High Capacity Feeder into the base engine.
10.
Tray 2 Take Away Roller
Drives the sheet of paper into the base engine Tray 1 Take Away Rollers .
11.
Tray 1 Take Away Roller
Part of the base engine. Drives the sheet of paper into the printer Registration
Rollers .
Volume 2 / High Capacity Feeder - Specifications 2-363