Xerox DOCUPRINT N4525 Service Quick Reference Manual page 416

Replacement
1.
Insert the Spring (PL 20.7.33) into the shaft on the rear side of the Chute-Buffer
Assembly (PL 20.7.27) so that the straight hook is on the inside and loosely
install the screw. (Figure 2)
2.
Insert the Spring (PL 20.7.32) into the shaft on the rear side of the Chute-Buffer
Assembly so that the straight hook is on the inside and loosely install the screw.
In the following steps, the Spring (PL 20.7.32) and Spring (PL
Note
20.7.33) are easily removed from the shafts. Accordingly, take
care not to drop or damage them.
3.
From the front side, insert the Chute-Buffer Assembly together with the Spring
(PL 20.7.32) and Spring (PL 20.7.33) into the inside of the Finisher, and align
them with the mounting positions, securing rear first.
4.
Secure the front side of the Chute-Buffer Assembly (PL 20.7.32). (Figure 1)
5.
Hook the Spring (PL 20.7.33) to the hole in the frame on the rear side of the
Finisher with a small screwdriver, etc.
6.
Hook the Spring (PL 20.7.32) to the hole in the frame on the front side of the
Finisher with a small screwdriver, etc.
7.
Mount the Front Cover-Open Front Cover and Kit Stud Cover (RRP 6-17).
8. Mount the Rear Cover (RRP 6-21).
9.
Mount the Front and Rear Top Cover (RRP 6-16).
10.
Mount the Jogging Cover (RRP 6-14).
6-748 DocuPrint N4525 Network Laser Printer - Service Guide