Installation Of The Xerox Ls 3270; Knowing The Front Panel - Xerox LS 3270 User Manual

Installation
Xerox LS 3270

2. Installation of the Xerox LS 3270

This chapter starts with an overview of the functionality of the front
panel. Then follows a description of how you connect the Xerox LS
3270 box to a printer.
NOTE:
Before you start the installation, make sure that the
rotary switch is set to the required emulation (PCL is
default). See the location of the switch in section
2.1. below.

2.1. Knowing the Front Panel

Coax Port
Rotary Switch
Fig 2-1 Xerox LS 3270 Front Panel
COAX
The coax cable is connected to the host which communicates in
accordance with the 3270 protocol.
PARALLEL/CENTRONICS OUT
The parallel/Centronics output port is connected to the
parallel/Centronics in put port on the target printer.
PAR
CU
B
T
A
TEST
Centronics Share Port
- 8 -
Get other manuals https://www.bkmanuals.com
Centronics Ouput Port
External Power Supply
Connector