Fig 2-34 Tray 4 Retard Assembly; Rrp 2-27Tray 4 Retard Assembly (Pl 12.8) - Xerox DOCUPRINT N4525 Service Quick Reference Manual

RRP 2-27Tray 4 Retard Assembly (PL 12.8)

Separator Gear
Separator Assembly

Fig 2-34 Tray 4 Retard Assembly

Removal
1.
Remove Tray 4 from the High Capacity Feeder (RRP 2-22).
2.
Remove the High Capacity Feeder Rear Cover (RRP 2-2).
3.
Open the Left Door C Assembly.
4.
Remove the screw securing the Left Door C Left Strap to the High Capacity
Feeder frame, and move the Strap out of the way.
5.
Unhook one arm of the Retard Spring from the hole in the High Capacity
Feeder frame, and release the Spring.
6.
Unhook the other arm of the Retard Spring from the Retard Assembly.
7. Remove the screw securing the Retard Support to the High Capacity Feeder
frame, and remove the Support.
8.
Hold on to the Retard Gear while you slide the Assembly off of the Spring shaft
and out of the High Capacity Feeder.
Separator Support
Volume 2 / High Capacity Feeder - RRPs
Separator Spring
S4525-223
2-449