Removal And Replacement Procedures - Xerox Phaser 7700 Service Manual

Removal and Replacement
Procedures
This topic illustrates how to remove and replace printer Field Replaceable Units
(FRUs). For more detailed removal/replacement procedures, refer to the Phaser
7700 Color Laser Printer Service & Support Resources CD-ROM. For specific
assemblies and parts, refer to the FRU Parts List on page 8-215.
This section contains the removal and replacement procedures for selected parts
of the printer. Not all Replacement Procedures are included in this Quick
Reference Guide. In most cases, to reinstall a part, simply reverse the Removal
Procedure shown. In some instances, the Replacement Procedure is included,
because it may contain special steps.
This section covers the print engine and Auxiliary Feeders only. For Removal and
Replacement of the Finisher, see the Phaser 7700 Light Finisher on page 11-303.
Service Quick Reference Guide - Removal & Replacement Procedures 7-137