3.2 TCP Send API
Configuration of the "TCP Send API" Using the SMSFinder Web Admin Interface
TCP Send API Status:
Enable "TCP Send API Status" to send SMS / query status using TCP API. By default, TCP Send API
is disabled.
TCP Port:
Configure the port to service the TCP Send API. Default is 2040
Note:
SMSFinder can be accessed ONLY from the preconfigured allowed networks.
Example: To access the SMSFinder 204.26.122.125 from 125.63.78.44, you MUST add the network
125.63.78.0 to the following SMSFinder screen:
•
Initiate a raw TCP connection to the SMSFinder's IP address over the "TCP Send API" port
•
Issue send command to send SMS.
•
Issue query command to query the status of send SMS.
Multi-Tech Systems, Inc. SMSFinder User Guide for System Administrators (Document S000451B)
Appendix A – Application Programming Interface (API)
Admin Access >> Allowed Networks
66