Administration > Factory Defaults; Save & Restart - Multitech SF100-G User Manual For System Administrators

Administration > Factory Defaults
Reset to Factory Defaults
Click the Factory Defaults button to load all configuration parameters to the original factory default
settings.
All Administration and Network Settings will return to the factory defaults. Use this option only if it is
necessary to wipe out your current Administration and Network Settings.
Note: SMS Settings (Address Book, Groups, Users, International Numbers, Triggers, Inbox, Outbox) will
not be reset using this option.
Reset SMSFinder Defaults
Clicking the SMSFinder Defaults button will delete the following:
•
All SMS configurations and
•
All Administrative and Network Settings.
This option is to be used only if really necessary to wipe out all current settings and completely start over.
Save & Restart
IMPORTANT Note About Save & Restart
When you have completed your SMSFinder settings and you are not going to enter any more data,
you must click the Save & Restart option located under the menu bar. The system will save the new
settings to the Flash Memory and give you the option to restart your SMSFinder. Saving to the Flash
Memory saves the new settings in the flash prom and prevents the settings from getting lost at the
next power up.
Note: The system will save the SMS settings every 8 hours automatically; however, it will not save
the system setting during this automatic save. The automatic saving of the SMS settings is helpful for
those times when the administrator does not have direct access to the Ethernet port.
Save
Click the Save button to save your system settings to the flash memory.
Restart is Optional
This is optional. You do not have to restart the SMSFinder after saving to the flash memory.
Multi-Tech Systems, Inc. SMSFinder User Guide for System Administrators (Document S000451B)
Chapter 4 – Using the SMSFinder's Web Interface
Administration > Factory Defaults
29