Sub-Menus; Table Of Menus And Sub-Menus - Multitech SF100-G User Manual For System Administrators

Sub-Menus

Each Menu selection has its own sub-menu, which displays on the left side of the screen.
When you click one of the Main Menu choices, the first screen listed in the sub-menu displays. Choose other
sub-menu options/screens by clicking on its name. The following is an example of the Administration sub-
menu.

Table of Menus and Sub-Menus

Administration
System Setup – Set up the SMTP server for e-mail notifications, the names of individuals who will receive
notifications, and the email ID for the notifications FROM line.
SNTP Client – Set up the synchronization of the SMSFinder clock to real time.
Admin Access – Set up the administrator's password and set an automatic inactivity disconnection interval.
Allowed Networks
Dialout, and Telnet. The administrator can then add, edit and delete any network. By default, the LAN
network is always allowed access to the SMSFinder. The administrator can configure the IP Address
and Subnet Mask as 0.0.0.0 to allow access to any network.
Remote Syslog – Configure the Remote Syslog status and server's IP. The default is Disabled.
Tools – Reset the cellular modem.
Factory Defaults
Network Setup
IP Settings – Specify your LAN settings and your TCP connection.
Cellular Modem – Configure the cellular modem.
SMS Services
Address Book – Manually input names and phone numbers into the phone book.
Groups – Create groups of names with their phone numbers.
International Number
Send SMS Users
SMS Settings – Enable or disable extended ASCII character support.
Send SMS – Send SMS messages by manually entering the message or using a message from the
Preconfigured SMS list.
SMS API – This page is divided into two sections: Send API and Receive API.
Send API – Configure the ports for Send APIs as well as enable/disable the service. API commands can
be sent via HTTP or TCP.
Receive API – Configure the SMS to Receive APIs.
Inbox – View messages received.
Outbox – View messages sent.
Triggers
Authentic List – From the address book set up a list of authentic users who are allowed to trigger broadcast
messages and action triggers.
Broadcast Triggers
Action Triggers – Create the triggers (codes or words) that will cause certain actions.
Pre-Configured SMS
Multi-Tech Systems, Inc. SMSFinder User Guide for System Administrators (Document S000451B)
– Set the networks to be allowed access to the SMSFinder's WEB GUI, Telnet
– Reset all parameters to the original factory defaults.
– Enable or disable international numbers.
– Set up users and their passwords.
– Configure trigger codes or words and broadcast messages. Set the destination
group. Set authentication option if desired.
– Write and save pre-configured messages.
Chapter 3 – SMSFinder Basics and Setup Wizard
19