Triggers > Pre-Configured Sms; Save & Restart - Multitech SF100-G User Manual For System Administrators

Triggers > Pre-Configured SMS
Use this screen to compose and save pre-configured messages.
Pre-Configured SMS
Click the Add button to open the Add a Pre-Configured SMS screen.
Add a Pre-Configured SMS
Note that fields marked with an asterisk are required.
Pre-Configured SMS
Enter the text for your Pre-Configured SMS Message.
Pre-Configured Group
Select the groups to receive this pre-configured message. Click Groups and select the desired groups. If
you change your mind about a group, highlight the group and click Delete to remove it from the list. Note
that a message can contain only 160 characters including spaces and punctuation.
Save
Click the Save button
Cancel
If you want to start over on this screen or do not want to continue creating this pre-configured message,
click Cancel.
Save & Restart
IMPORTANT Note About Save & Restart
When you have completed your SMSFinder settings and you are not going to enter any more data,
you must click the Save & Restart button located under the menu bar. The system will save the new
settings to the Flash Memory and give you the option to restart your SMSFinder. Saving to the Flash
Memory saves the new settings in the flash prom and prevents the settings from getting lost at the
next power up.
Note: The system will save the SMS settings every 8 hours automatically; however, it will not save the
system setting during this automatic save. The automatic saving of the SMS settings is helpful for
those times when the administrator does not have direct access to the Ethernet port.
Save
Click the Save button to save your system settings to the flash memory.
Restart is Optional
This is optional. You do not have to restart the SMSFinder after saving to the flash memory.
Multi-Tech Systems, Inc. SMSFinder User Guide for System Administrators (Document S000451B)
Chapter 4 – Using the SMSFinder's Web Interface
Triggers > Pre-Configured SMS
44