Multitech SF100-G User Manual For System Administrators page 43

Table of Trigger Codes and Trigger Actions
Trigger Objective
Code/Word
ADD To add an entry in
the address book
ADDG To add a group
name and an entry.
Note:
action trigger
message is used for
creating a group
name and adding
an entry to a group.
So, in the interface
there will be one
configuration for
both
ADDSMS To add a pre-
configured SMS
DEL To delete an entry
from the address
book
DELG To delete a group
Multi-Tech Systems, Inc. SMSFinder User Guide for System Administrators (Document S000451B)
Configuring the Trigger Code and Its
Associated Trigger Action
Configuration format:
<act_tri_configured>;name;number
Example:
ADD;first last;7633604174
Configuration format:
<act_tri_configured>;name
Example:
ADD;first last
Configuration format:
<act_tri_configured>
Example:
ADD
Configuration format:
<act_tri_configured>;grp_name
The same Example:
ADDG;Building_201
Configuration format:
<act_tri_configured>;grp_name;name;
number
Example:
ADDG;Building_201;first last;
7633604174
Configuration format:
<act_tri_configured>;grp_name;name;
Example:
ADDG;Building_201;first last
Configuration format:
<act_tri_configured>;SMS
Example:
ADDSMS;Building 201 is closed until
further notice.
Configuration format:
<act_tri_configured>;name;number
Example:
DEL;first last;7633604174
Configuration format:
<act_tri_configured>;name
Example:
DEL;first last
Configuration format:
<act_tri_configured>;grp_name
Example:
DELG;Building_201;first last
Chapter 4 – Using the SMSFinder's Web Interface
Action
Adds name with number to
address book.
Adds name with sender's
number to address book.
Adds name and number of
sender to address book.
Creates a group with a group
name.
Adds name with number to a
group. Group must already
exist.
Adds name to a group. Group
must already exist.
Adds SMS to preconfigured list.
Deletes name with number from
the address book.
Deletes all entries with this
name from the address book.
Deletes the group with the
group name.
43