Sms Services > Api - Multitech SF100-G User Manual For System Administrators

OR
Select Group
Click Groups to display all group names. Select the Groups to which a new message will be sent. Click
the Add button after each selection. The group name will display in the box. If you change your mind
about a group, highlight the group name and press the Delete button or check the Select all the Groups,
and press the Delete button and all groups will be deleted.
SMS Text
Enter the text of the message you want to send. The maximum number of characters is 160 including
spaces and punctuation.
OR
You can choose a Pre-Configured Message that you set up on the Triggers > Pre-Configured SMS
screen. Click the Pre-Configured Message text to access a list of pre-configured messages. See
Triggers > Pre-Configured Messages for entering pre-configured messages.
SMS Services > API
SMS Services > API consists of two screens: Send API and Receive API.
Note: See the Appendix A for more information about the Application Programming Interface (API).
SMS Services > SMS API > Send API
On the Send API screen you can enable/disable Send API and configure the ports for sending API.
HTTP Send API Configuration
HTTP Send API Status
Check the box to enable the HTTP Send API service.
HTTP Port
Enter the port number on which Send API service is available. This port can be the same as the Web
port. The default is 80.
Save
Click the Save button.
TCP Send API Configuration
TCP Send API Status
Check the box to enable TCP Send API service.
TCP Port
Enter the port number on which TCP API service is available. The default is 2040.
Save
Click the Save button.
Multi-Tech Systems, Inc. SMSFinder User Guide for System Administrators (Document S000451B)
Chapter 4 – Using the SMSFinder's Web Interface
SMS Services > Send SMS continued
SMS Services > SMS API
SMS Services > SMS API > Send API
37