Multitech SF100-G User Manual For System Administrators page 41

Add a Broadcast Trigger
Note that the fields marked with an asterisk are required. This is a setup screen; no messages are
sent from this screen.
Trigger Message
Type in a code or word that you want to trigger a broadcast message.
•
Some trigger words can be given to all users.
•
Some trigger words can be created for authenticated users only.
•
Some trigger words can be created for use by the administrator only.
Broadcast Message
Type in a message that will be broadcast when the trigger code or word is received, or click Pre-
Configured Message if you want to use one of these messages as your broadcast message.
To
Select the Groups who will receive this broadcast message. Click Groups to display your list of group
choices. If you change your mind, you can highlight the name of a group and click Delete to remove a
group from the list.
Authenticate
Check the Authenticate box if you want this trigger code or word and the broadcast message to be
managed by the authentication function.
Authentic Users
Select the Authentic Users who are allowed to trigger and initiate a broadcast message on this
screen.
Save or Cancel
Click the Save button, or if you change your mind and do not want the information saved, click
Cancel.
Multi-Tech Systems, Inc. SMSFinder User Guide for System Administrators (Document S000451B)
Chapter 4 – Using the SMSFinder's Web Interface
Triggers > Broadcast Triggers Continued
41