Multitech SF100-G User Manual For System Administrators page 15

5. The Internet Protocol (TCP/IP) Properties screen.
Important Note:
If this screen opens and displays your current IP configuration, we suggest you record this information for
future reference (i.e., after the SMSFinder is configured, you may wish to return this PC to its original
settings).
•
To set a Fixed IP Address for the workstation, select Use the following IP address.
∗
Enter the workstation IP Address. Example: 192.168.2.x.
Note: The x in the address stands for numbers 101 and up.
∗
Enter the workstation Subnet Mask. Example: 255.255.255.0
∗
Enter the workstation Default Gateway. Example: 192.168.2.2
Note:
The factory default settings for the SMSFinder are:
IP Address: 192.168.2.1
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.2.2
•
Select Use the following DNS server addresses.
∗
Enter the IP Address for the Preferred DNS Server. Example: 205.171.3.65
∗
Click OK.
•
Close the Local Area Properties screen by clicking OK.
•
Close the Control Panel.
•
Repeat these steps for each PC on your network.
Multi-Tech Systems, Inc. SMSFinder User Guide for System Administrators (Document S000451B)
The workstation settings must be in the same subnet range as the SMSFinder.
Chapter 2 – Getting Started
15