Table of Contents
Advertisement
Chapter 9 – Miscellaneous
#VVERSION – Software Version
Description:
This command directs the TCP/IP stack to display the software version.
Syntax:
Set Value: AT#VVERSION
Values:
No TCP/IP parameters
Default
Value: None
#VSTATE – Display the Current Status of the Device
Description:
This command directs the TCP/IP stack to display the current status of the device.
Syntax:
Set Value: AT#VSTATE
Values:
No TCP/IP parameters
Default
Value: None
#VALL – Display All AT Parameters
Description:
This command directs the TCP/IP stack to display all AT# parameters. The parameters
are displayed by blocks of categories separated by a <CR><LF> sequence, all at the
same time.
Syntax:
Set Value: AT#VALL
Values:
Read parameters. All parameters.
Default
Value: None
&F – Restore Default Factory Settings
Description:
This command restores the default factory settings value for the whole IP module.
Syntax:
Set Value: AT&F
Values:
No parameter values.
Default
Value: None
A/ – Previous Command
Description:
This command executes the previous command.
Syntax:
A/
Values:
No parameter values.
Default
Value: None
Multi-Tech Systems, Inc. AT Commands for the MT800SWM & MTS2WFA (S000425D)
Commands
Chapter 9 – Miscellaneous Commands
34
Advertisement
Table of Contents
