Front Case Assembly Replacement; Figure 13: Battery Installation - Nellcor OxiMax NPB-40 Service Manual

Front Case Assembly Replacement

NPB-40
10. Install the batteries and battery cover. See Figure 13.
1 —
2 —
3 —

Figure 13: Battery Installation

11. Perform the performance verification tests before placing the NPB-40 into
service. See Pulse Oximetry Functional Tests on page 24.
The front case assembly contains the keypad. Perform the following procedure to
replace the front case assembly.
1. Remove the batteries from the NPB-40. See Prior to Disassembly on page 43.
2. Separate the front and rear case assemblies. See Separating the Front and
Back Cases on page 44.
3. Dispose of the front case assembly in accordance with local regulations.
Batteries
Battery cover
Battery cover latch
Disassembly Guide
49