Figure 17: Front Case Wiring; Figure 18: Front Case Mounting Screws - Nellcor OxiMax N-550 Service Manual

Disassembly Guide

Figure 17: Front case Wiring

4. Disconnect the speaker wire connector, item 2, from the main PCB.
5. Disconnect the ribbon cable connector, item 3, from the front case PCB.
6. Remove the bracket screw connected to the main PCB. See Figure 18
item 1.

Figure 18: Front Case Mounting Screws

7. Remove the bracket screw, item 2, connected to the front PCB.
8. Remove the front panel assembly from the top case assembly.
N-550 59