General Operation
Operation with a Live Subject
NPB-40
The following test is an overall performance check of the system:
•
Operation with a Live Subject on page 23.
Patient monitoring involves connecting the O
qualitative test.
.
1. Connect a Nellcor O
2. Clip the MAX-A to the subject as recommended in the O
Directions For Use.
3. Press the Power button to turn the NPB-40 on and verify that the NPB-40 is
operating.
4. The NPB-40 should stabilize on the subject's physiological signal in about 15
to 30 seconds. Verify that the oxygen saturation and pulse rate values are
reasonable for the subject.
5. Press the Data button. The NPB-40 records snap-shot data.
M
XI
1
Sensor Port
—
M
MAX-A oxygen O
XI
AX
Performance Verification
sensor to a live subject for a
AX
M
sensor to the NPB-40.
XI
AX
M
sensor's
XI
AX
23