Test #4: Light Level
NPB-40
5. Perform Test #2: SpO2 on page 27. The Pulse Amplitude indicator should
indicate high level modulation.
6. Press the SRC-MAX % MODULATION selection button. The SRC-MAX %
MODULATION
7. The NPB-40 pulse blip bar decreases in amplitude.
8. The NPB-40:
•
displays 75 %SpO
•
displays 60 bpm
•
alarms
•
Pulse Amplitude indicator displays low level modulation
9. Perform Test #1: BPM on page 26. The pulse amplitue indicator should
indicate low level modulation.
10. Perform Test #2: SpO2 on page 27. The pulse amplitue indicator should
indicate low level modulation.
1. Press the SRC-MAX LIGHT LEVEL selection button. The SRC-MAX
LIGHT LEVEL
LED lights.
2
LED lights.
Performance Verification
29