Figure 19: Battery Spring Alignment; Figure 20: Installing The Case Screws - Nellcor OxiMax NPB-40 Service Manual

NPB-40
5. Install the display PCB and CPU PCB into the NPB-40 case. Ensure that the
battery springs slip into place. See Figure 19.

Figure 19: Battery Spring Alignment

Note: The longer screws install at the top of the case. See Figure 20, items 1
and 4.
6. Place the front and rear cases together and install the four screws. See
Figure 20.

Figure 20: Installing The Case Screws

Disassembly Guide
53