Front Case Disassembly
N-550B
1. Perform the procedure Prior to Disassembly on page 54.
2. Perform the procedure Separating Top and Bottom Cases on page 54.
3. Disconnect the SpO
Figure 17 item 1.
Figure 17: Front case Wiring
4. Disconnect the speaker wire connector, item 2, from the main PCB.
5. Disconnect the ribbon cable connector, item 3, from the front case PCB.
6. Remove the bracket screw connected to the main PCB. See Figure 18
item 1.
cable connector from the MP-506 PCB. See
2
Disassembly Guide
57