Table of Contents
Advertisement
94
2-1. Instrument cluster
power. (P.362)
●
The vehicle speed is approximately 80
mph (130 km/h) or higher.
Boost gauge/engine oil tempera-
ture gauge/engine oil pressure
gauge
The following items can be displayed
on the multi-information display.
Boost gauge
A
Displays the boost pressure. The display
will change color if the specified pressure is
exceeded.
Engine oil temperature gauge
B
Displays the engine oil temperature. The
display will flash if the engine oil tempera-
ture exceeds 284 °F (140 °C).
Engine oil pressure gauge
C
Displays the engine oil pressure. A buzzer
will sound and warning message will be
displayed if the engine oil pressure
becomes low. (P.489)
This display is intended for use as a guide-
line. Depending on factors such as the road
surface condition, temperature and vehicle
speed, the display may not show the actual
condition of the vehicle.
G-force
Displays lateral G-forces on the vehi-
cle on the multi-information display.
Displays around the periphery of the
G-force display, the left and right
steering amount, accelerator pedal
input, and brake fluid pressure.
Acceleration G-force on the vehi-
A
cle
Current G-force value (analyzed
B
value of front/rear and left/right
G-forces)
Record of the maximum G-forces
C
Accelerator pedal input
D
Brake fluid pressure
E
Left steering amount
F
Right steering amount
G
This display is intended for use as a guide-
line. Depending on factors such as the road
surface condition, temperature and vehicle
speed, the display may not show the actual
condition of the vehicle.
Resetting the record of maximum
G-forces
The display is reset each time the engine is
started.
Peak hold function
If lateral G-forces of 0.5 G or greater are
generated, the G-force value display will
turn amber and be held for 2 seconds.
Advertisement
Table of Contents
