Lexus RX350 2023 Manual page 166

166
3-6. Favorite settings
contact your Lexus dealer.
■ Using the voice control system
*
: If equipped
The following operations can be performed
using the voice control system:
Driving position registration
●
Driving position recall (only when the
●
shift position is in P)
For details, refer to the "MULTIMEDIA
OWNER'S MANUAL"
Registering/canceling/recall a
driving position to an electronic
key (memory recall function)
(driver's side only)
Identifying a driver with the elec-
■
tronic key assigned and registered
in My Settings
The driving positions can be automati-
cally recalled for each registered
driver by registering electronic key
assignments in My Settings.
 Driving position registration proce-
dure
When the shift position is shifted to P after
driving the vehicle, the current driving
position will be recorded.
 Driving position recall procedure
1
Carry only the key that has been
assigned and registered in My Set-
tings, and then unlock and open the
driver's door using the smart
access system with push-button
start or wireless remote control.
The driving position other than the steering
wheel and head-up display (if equipped)
will move to the recorded position. How-
ever, the seat will move to a position slightly
behind the recorded position in order to
make entering the vehicle easier.
If the driving position is in a position that
*
has already been recorded, the driving
position will not move.
2
Turn the engine switch to ACC or
ON.
The seat, steering wheel and head-up dis-
play (if equipped) (only when the engine
switch is in ON) will move to the recorded
position.
 Memory recall function cancelation
procedure
Initialize the driver registered settings in
My Settings.
For information on initializing driver regis-
tered settings, refer to the "MULTIMEDIA
OWNER'S MANUAL".
Identifying a driver with face infor-
■
mation assigned and registered in
My Settings
The driving positions can be automati-
cally recalled for each registered
driver by registering face information
in the face authentication system and
registering the face information assign-
ment in My Settings.
 Driving position registration proce-
dure
When the shift position is shifted to P after
driving the vehicle, the current driving
position will be recorded.
 Driving position recall procedure
Turn the engine switch to ACC or ON.
After face authentication is performed
successfully, the seat, steering wheel, and
head-up display will move to the registered
driving position (only when the engine
switch is turned on). They will not move if
already in the registered driving position.
If the driving position is in a position that