Table of Contents
Advertisement
(including the certain genuine manufacture
parts) and/or accessory attached, it may not
be possible to charge the portable device. If
the portable device is placed on the
charging area and does not charge, remove
the cover and/or accessories.
■
While charging, noise enters the AM
radio
During charging, if noise occurs when lis-
●
tening to the AM radio, the charging fre-
quency is automatically changed to
reduce the noise.
Rapid charging may not be performedas
●
AM radio reception is prioritized.
●
When automatically seeking AM radio
stations, charging will be suspended to
prevent charging noise from being
detected as a radio station. Charging will
resume automatically when seek tuning is
stopped.
Charging precautions
■
While charging, the wireless charger and
the portable device will become warm. This
is not a malfunction. If a portable device
becomes warm while charging and
charging stops due to the protection func-
tion of the portable device, wait until the
portable device cools down and charge it
again.
Also, to decrease the temperature inside
the wireless charger, a fan may operate.
This does not indicate a malfunction.
■
Sound generated during operation
Operation sounds may be heard when the
engine switch is pressed to change to ACC
or ON, or when a portable device is being
detected. This does not indicate a malfunc-
tion.
■
Cleaning the wireless charger
P.426
■
Situations in which the wireless charger
may not operate correctly
In the following situations, the wireless char-
ger may not operate correctly:
When a portable device is fully charged
●
●
When a portable device is being charged
by a wired connection
5-5. Using the other interior features
When there is a foreign object between
●
the charging area and portable device
●
When the temperature of a portable
device becomes high while charging
●
When the temperature near the charging
tray is 95°F (35°C) or more due to being
in direct sunlight, etc.
When a portable device is placed with its
●
charging surface facing up
●
When a portable device is not centered
on the charging area
When a portable device is larger than the
●
charging tray
●
When a foldable portable device is
placed outside of the charging area
●
When the vehicle is near a TV tower,
electric power plant, fuel station, radio
station, large display, airport, or other
facility that generates strong radio waves
or electrical noise
The electronic key is not inside the vehi-
●
cle
●
When the any of the following objects,
with a thickness of 0.08 in. (2 mm) or
more, are between the charging surface
of a portable device and the charging are:
• Thick cases or covers
• A case or cover attached with an uneven
or tilted surface, so that the charging side
is not flat
• Thick decorations
• Accessories, such as finger rings, straps,
etc.
When there is a gap between the
●
charging side of the portable device and
the charge area due to a protrusion such
as a camera on the charging side of the
portable device.
●
When the portable device is in contact
with, or is covered by any of the following
metallic objects:
• Cards covered with metal, such as alumi-
num foil
• Cigarette boxes that have aluminum foil
inside
• Metallic wallets or bags
• Coins
• Heat packs
• Recorded media such as CDs and DVDs
• Metallic decorations
409
5
Advertisement
Table of Contents
