Table of Contents
Advertisement
WARNING
When installing a child restraint system
●
in the rear center seat, adjust both seat
cushions to the same position and
align both seatbacks at the same
angle. The seatbacks must be adjusted
to the same angle. Otherwise, the
child restraint system cannot be
securely restrained and this may cause
death or serious injuries in the event of
sudden braking, sudden swerving or
an accident.
●
If the seat is adjusted, reconfirm the
security of the child restraint system.
NOTICE
■
Anchor brackets (for top tether
strap)
When not in use, make certain to close
the lid. If it remains open, the lid may be
damaged.
Using a top tether anchorage
(for Puerto Rico)
Top tether anchorages
■
Top tether anchorages are provided
for each rear seat.
Use top tether anchorages when fixing
the top strap.
Outboard rear seats
Top tether anchorages
A
1-2. Child safety
Top tether strap
B
Rear center seat
Top tether anchorages
A
Top tether strap
B
Fixing the top strap to the top
■
tether anchorage
Install the child restraint system in
accordance to the operation manual
enclosed with the child restraint sys-
tem.
1
Remove the head restraint if it inter-
feres with your child restraint sys-
tem. (P.138)
If the head restraint cannot be removed,
raise it to the uppermost position.
2
Open the top tether anchorage
cover, latch the hook onto the top
tether anchorage and tighten the
top strap.
Make sure the top strap is securely latched.
(P.55)
63
1
Advertisement
Table of Contents
