Table of Contents
Advertisement
(forward) function
: Change the perpendicular parking
(reverse) function
Customize setting button
G
Select to display the Advanced Park set-
ting screen. (P.360)
Registration button
H
Select to begin registering a parking
space.
Guidance screen (When reversing)
Operation icon
A
Displayed when the Advanced Park is
operating.
Guide lines (yellow and red)
B
Display points from the center of the edge
of the front or rear bumper to the target
stopping position (yellow)
mately 1 ft. (0.3 m) (red) from the vehicle.
Moving object warning icon
C
Emergency support brake control
D
operation display
"Brake" is displayed.
Intuitive parking assist display
E
P.311
*
: The yellow lateral line is not displayed
when the target stopping position is
approximately 8.2 ft. (2.5 m) or more
away from the vehicle.
Intuitive parking assist pop-up display
■
Regardless of whether the intuitive parking
assist is off or on (P.311), if an object is
detected by the intuitive parking assist
when the Advanced Park is operating, the
intuitive parking assist pop-up display will
automatically be displayed over the guid-
ance display.
Brake control operation when
■
Advanced Park is operating
While the Advanced Park is operating, if the
4-5. Using the driving support systems
system determines that the possibility of
collision with detected moving or stationary
object is high, the engine output restriction
control and brake control will operate.
If brake control operates, Advanced Park
operation will be suspended and a message
will be displayed on the multi-information
display.
Buzzer
■
Depending on surrounding sounds or
sounds from other systems, it may be diffi-
cult to hear the buzzer of this system.
If a black screen is displayed on the cen-
■
ter display when the Advanced Park is
operating
The system is being affected by radio waves
or may be malfunctioning. If a radio antenna
is installed near a camera, move it to a loca-
tion as far from the cameras as possible. If a
radio antenna is not installed near a camera,
and the screen does not return to normal
after turning the engine switch off and then
*
and approxi-
starting the engine again, have the vehicle
inspected by your Lexus dealer.
Perpendicular parking (for-
ward/reverse) function
The perpendicular parking (for-
ward/reverse) function can be used if
the target parking space can be
detected when the vehicle is stopped
close and perpendicular to the center
of the parking space. Also, depending
on the condition of the parking space,
etc., if it is necessary to change the
direction of travel of the vehicle, the
shift position can be shifted by assis-
tance control.
345
4
Advertisement
Table of Contents
