Table of Contents
Advertisement
Figure 3 When brake control operates
Engine output
A
Braking force
B
Time
C
Engine output restriction control begins operating (System determines that
D
possibility of collision with detected object is high)
Brake control begins operating (System determines that possibility of collision
E
with detected object is extremely high)
■
If the PKSB (Parking Support Brake) has
operated
If the vehicle is stopped due to operation of
the PKSB (Parking Support Brake), the
PKSB (Parking Support Brake) will be dis-
abled and the driving assist infomation indi-
cator will illuminate. If the PKSB (Parking
Support Brake) operates unnecessarily,
brake control can be canceled by depress-
ing the brake pedal or waiting for approxi-
mately 2 seconds for it to automatically be
canceled. Then, the vehicle can be oper-
ated by depressing the accelerator pedal.
Re-enabling the PKSB (Parking Support
■
Brake) system
To re-enable the PKSB (Parking Support
Static Objects Front and Rear of the vehicle
If the sensors detect a static object, such as a wall, in the travelling direction of the
4-5. Using the driving support systems
Brake) when it has been disabled due to
operation of the PKSB (Parking Support
Brake), either enable the system again
(P.328), or turn the engine switch off and
then back to ON.
Additionally, if any of the following condi-
tions are met, the system will be re-enabled
automatically and the driving assist infoma-
tion indicator will turn off:
●
The P shift position is selected
●
The object is no longer detected in the
traveling direction of the vehicle
The traveling direction of the vehicle
●
changes
331
4
Advertisement
Table of Contents
