Table of Contents
Advertisement
WARNING
Never attach two child restraint system
●
attachments to the same anchor. In a
collision, one anchor may not be
strong enough to hold two child
restraint system attachments and may
break.
If the lower anchorages are already in
use, use the seat belt to install a child
restraint system in the center seat.
●
When securing some types of child
restraint systems in rear seats, it may
not be possible to properly use the
seat belts in positions next to the child
restraint without interfering with it or
affecting seat belt effectiveness. Be
sure your seat belt fits snugly across
your shoulder and low on your hips. If it
does not, or if it interferes with the
child restraint, move to a different posi-
tion. Failure to do so may result in
death or serious injury.
●
If the seat is adjusted, reconfirm the
security of the child restraint system.
Using an anchor bracket (for top
tether strap) (except for Puerto
Rico)
Anchor brackets (for top tether
■
strap)
Anchor brackets are provided for each
rear seat.
Use anchor brackets when fixing the
top tether strap.
1-2. Child safety
Outboard rear seats
Anchor brackets
A
Top tether strap
B
Rear center seat
Anchor bracket
A
Top tether strap
B
Fixing the top tether strap to the
■
anchor bracket
Install the child restraint system in
accordance to the operation manual
enclosed with the child restraint sys-
tem.
1
Remove the head restraint if it inter-
feres with your child restraint sys-
tem. (P.138)
If the head restraint cannot be removed,
61
1
Advertisement
Table of Contents
