3-6. Favorite Settings; Driving Position Memory - Lexus RX350 2023 Manual

164

3-6. Favorite settings

3-6.Favorite settings

Driving position memory

*
: If equipped
This feature automatically adjusts
the driver's seat (on some models),
steering wheel, outside rear view
mirrors and head-up display (if
equipped) to make entering and
exiting the vehicle easier or to suit
your preferences.
Up to 3 different driving positions
can be recorded.
Each electronic key can be regis-
tered to recall your preferred driv-
ing position.
Power easy access system
(driver's side only)
The seat and steering wheel are auto-
matically adjusted to allow the driver to
enter and exit the vehicle easily.
When all of the following have been
performed, the seat and steering
wheel are automatically adjusted to a
position that allows driver to enter and
exit the vehicle easily.
• The shift position has been shifted to
P.
• The engine switch has been turned
off.
*
• The driver's seat belt has been
unfastened.
When any of the following has been
performed, the seat and steering
wheel automatically return to their
original positions.
• The engine switch has been turned
to ACC or ON.
• The driver's seat belt has been fas-
tened.
■ Operation of the power easy access sys-
tem
When exiting the vehicle, the power easy
access system may not operate if the seat is
already close to the rearmost position, etc.
■ Jam protection function
While the power easy access system is
operating, if an object is stuck behind the
front seat, the front seat will stop and then
slightly move forward. When the jam pro-
tection function operates, the seat stops at a
position other than the set seat position.
Check the seat position.
■ Customization
Some functions can be customized.
(P.543)
WARNING
■ While the power easy access system
is operating and the steering wheel
and seat is moving
Be careful not to get body parts or lug-
gage caught. Failure to do so may cause
an injury or damage to the luggage.
Recording a driving position into
memory
1
Check that the shift position is in P.
2 Turn the engine switch to ON.