Table of Contents
Advertisement
Enabling outside manual release handle
■
operation using the mechanical key
Operation of a manual release handle can
be enabled by unlocking a door with the
mechanical key.
1
Insert a plastic card, etc. into the gap in
the door handle to pry up the cover.
To avoid damage, do not apply excessive
force to the cover.
2
Remove the cover by pressing it on the
rear.
3
Using the mechanical key, turn the lock
cylinder to the unlock side to enable the
manual release handle operation.
The mechanical key can only be inserted in
one direction, as the key only has a groove
on one side.
If the key cannot be inserted in a lock cylin-
der, turn it over and re-attempt to insert it.
■
Conditions which manual release han-
dle operation is disabled
●
Normally, operation of the outside man-
ual release handles is disabled, and they
7-2. Steps to take in an emergency
cannot be used to open the doors.
When operation is enabled by operating a
manual release handle or using a mechani-
cal key, operation will be disabled automat-
ically if the door is opened using the door
opener switch or locked.
Operation of the inside manual release
●
handles is disabled when the engine
switch is in ON, and they cannot be used
to open the doors.
When operation is enabled by operating a
manual release handle or using a mechani-
cal key, operation will be disabled automat-
ically if the door is opened using the door
opener switch or locked.
●
To prevent a door from being opened
accidentally, when the engine switch is in
ON, after an inside manual release han-
dle is operated once, operation will auto-
matically be disabled after approximately
1 second.
513
7
Advertisement
Table of Contents
