Lexus RX350 2023 Manual page 147

To prevent the light sensors from mal-
■
functioning
To prevent the light sensors from malfunc-
tioning, do not touch or cover them.
WARNING
Observe the following precautions.
Failure to do so may result in death or
serious injury.
■ While driving
● Do not adjust the position of the Digital
Rear-view Mirror or adjust the display
settings while driving.
Stop the vehicle and operate the Digi-
tal Rear-view Mirror control switches.
Failure to do so may cause a steering
wheel operation error, resulting in an
unexpected accident.
Always pay attention to the vehicle's
●
surroundings.
The size of the vehicles and other objects
may look different when in digital mirror
mode and optical mirror mode.
When backing up, make sure to directly
check the safety of the area around your
vehicle, especially behind the vehicle.
Additionally, if a vehicle approaches from
the rear in the dark, such as at night, the
surrounding area may appear dim.
To prevent causes of fire
■
If the driver continues using the Digital
Rear-view Mirror while smoke or odor
comes from the mirror, it may result in
fire. Stop using the system immediately
and contact your Lexus dealer.
3-4. Adjusting the steering wheel and mirrors
Cleaning the Digital Rearview
Mirror
Cleaning the mirror surface
■
If the mirror surface is dirty, the image
on the display may be difficult to see.
Clean the mirror surface gently using a
soft dry cloth.
■ The camera
The camera for the Digital Rear-view Mir-
ror is located as shown.
NOTICE
■ To prevent the camera from malfunc-
tioning
Observe the following precautions,
●
otherwise the Digital Rear-view Mirror
may not operate properly.
• Do not strike or hit the camera or sub-
ject it to a strong impact, as the camera
installation position and angle may be
changed.
• Do not remove, disassemble or modify
the camera.
• Do not allow an organic solvent, car
wax, window cleaner or glass coating
to adhere to the camera. If this hap-
pens, wipe it off as soon as possible.
• When applying colored film (including
transparent film) to the rear window
glass, do not apply it to the area in front
of the camera. If film is applied to the
area in front of the camera, the image
from the camera may not display prop-
erly.
147
3