Table of Contents
Advertisement
92
2-1. Instrument cluster
Switch function change switch
C
Each time this switch is pressed, the functions will change.
Switch icon display
D
The icon of each switch will be displayed. The touched switch will be highlighted. (
Switch function guide display
E
The function guide for the touched switch will be displayed.
Switching the display of the
■
multi-information display (vehicles
without a head-up display)
1
Press
or
of the meter con-
trol switch.
Switching driving information
1
Press the
or
switch to select
or
.
Switching the display of the
■
multi-information display (vehicles
with a head-up display)
1
Select
on the center display.
2
Select "Vehicle customize".
3
Select "Meter".
4
Select
or
of "Display
switching".
The display changes each time the switch is
selected.
If the steering wheel switches do not
■
respond when touched (vehicles with a
head-up display)
●
It is easier to make the steering wheel
switches respond by moving your thumb
while touching them.
●
If the surface of a steering wheel switch is
dirty, turn the engine switch off and then
clean the switches.
By turning winter glove mode on, the sen-
●
sitivity of the switch sensors can be
increased. (P.543)
Switching with the steering wheel
■
switches (vehicles with a head-up dis-
play)
If
steering wheel switch function, the display
can be switched by pushing
meter control
. Then press
Display of drive information
Driving related information is dis-
played on the following displays.
Multi-information display
Head-up display (If equipped)
Center display
The items displayed will differ depend-
ing on the display.
Drive information 1
The following items can be displayed
on the multi-information display.
Use the displayed values as a refer-
ence only.
Current fuel consumption
Displays instantaneous current fuel con-
sumption
Average fuel consumption
/
is set as a favorite
.
F
)
or
Advertisement
Table of Contents
