Table of Contents
Advertisement
Chapter 4. T1 Network Interface
Unit Menu
4-14
The Unit menu changes the baud rate of the Chain-In port
and the setup of the Chain-Out port. The menu items are:
Ctl Port Rate
Sets the baud rate for communication with the PC or modem.
Choices: 1200, 2400, 9600, 19200 and 38400 kbps
Traps
Enables or disables the transmission of trap messages.
Choices: Enable, Disable
Access
Sets the method of connection from the TSU 610 to T-Watch
Pro/SNMP.
Choices:
Direct - Used if connected directly to the PC
Dial - Used when connection is through a modem. The dial
string is entered from T-Watch Pro/SNMP.
Init Modem
Allows you to choose an industry standard or a custom
initialization string for a modem connected to the control
port.
Control Port
Selects the TCP/IP physical interface.
Choices: SLIP using the EIA-232 serial port.
If this option is set to SLIP, the Chain-In port may not be used as
a terminal interface.
IP Address
Uniquely identifies the TSU 610 on a TCP/IP network. This
address is composed of four decimal numbers, each in the
range of 0 to 255, separated by periods.
Subnet Mask
This value is set to 0.0.0.0.
Default Router
This value is set to 0.0.0.0.
TSU 610 User Manual
61200610L2-1
Advertisement
Table of Contents
