Chapter 2. Installation
2-14
•
Termination of the supplementary equipment
grounding conductor is permitted to be made to
building steel, to a metal electrical raceway system,
or to any grounded item that is permanently and
reliably connected to the electrical service equipment
ground.
•
The supplemental grounding conductor shall be
connected to the equipment using a number 8 ring
terminal.
•
The terminal should be fastened to the grounding
lug provided on the rear panel of the equipment.
•
The ring terminal should be installed using the
appropriate crimping tool (AMP P/N 59250 T-EAD
Crimping Tool or equivalent).
TSU 610 User Manual
61200610L2-1