Appendix C
T1 NETWORK MODULE
Network Connections
1
2
3
4
5
6,7,8
61200610L2-1
Network Pinouts
There are four jacks on the rear panel of the T1 Network
Module:
•
Two dual test jacks
•
an 8-pin modular connector
•
a 15-pin male D-connector
The latter two connectors are connected in parallel and are
used for connecting to the network. See Table C-1 and Table C-
2 for the pinouts of the network interfaces.
The network connections are as follows:
Connector Type
Part Number
Pin
Name
RXDATA-RING
RXDATA-TIP
UNUSED
TXDATA-RING
TXDATA-TIP
UNUSED
(USOC) RJ-48C
AMP# 555164-1
Receive data from the network
Receive data from the network
Transmit data toward the network
Transmit data toward the network
TSU 610 User Manual
Table C-1. RJ-48C Pinouts
Description
C-1