Time/Date
If you want to...
Record the entry and
move to the next editing
position
Move to a different field
to edit
End the editing process
Factory Restore
Set Passcode
61200610L2-1
This menu option displays or edits the current time and date.
The TSU 610 maintains the time and date during power-off
conditions.
This menu item restores the factory default settings for all
unit parameters, including configured DS0 maps.
Enter Passcode from Other Menus
The
prompt may make an unexpected appearance
Passcode
from other menu operations. This happens only when the
unit is operating in the limited access mode, i.e., without an
active passcode. The limited access mode may become active
even if a passcode was entered, as it does when there is no
activity for ten minutes. If the unit is to be remotely accessed
using T-Watch Pro, a passcode must be entered. When
managing a number of units, the passcode can be the same
for all.
The unexpected appearance of the
for example, while operating in a limited access mode and
attempting to change the data rate,
. Use the number keys to enter the correct passcode and
RATE
press
. The unit displays
Enter
Pressing any key after entering a passcode causes the unit to
return to the previous active menu. In this case it returns to
CONFIG, UNIT, CTL PORT RATE
rate.
TSU 610 User Manual
Chapter 5. HDSL Network Interface
Do this...
Press
after any numeric change
Enter
Press
at the editing position with-
Enter
out making any changes, or
use the
and
UP
DOWN
Press
Cancel
Passcode
CONFIG, UNIT, CTL PORT
Access Granted
to permit changing the data
arrow keys
prompt occurs,
.
5-21