ADTRAN TSU 610 User Manual page 134

Appendix A. Understanding SNMP
MIB
COMMANDS
GetRequest
GetNextRequest
SetRequest
A-2
This is an index to the organized data within a network
device. It defines the operating parameters that can be
controlled or monitored. When requesting the network
manager to retrieve or modify a particular piece of
information about a network device, the network manager
transmits the request to that network device. The agent in
that device interprets the incoming request, performs the
requested task, and sends its response to the network
manager. The network manager collects all the data from the
various network devices and presents it in a consistent form.
Using SNMP Version 1, the network manager can issue three
types of commands:
.
SetRequest
This command retrieves a single item or the first in a series
from a network device.
This command retrieves the next item in a series from a
network device.
This command writes information to a network device.
TSU 610 User Manual
,
GetRequest GetNextRequest
, and
61200610L2-1