Table of Contents
Advertisement
Chapter 5. HDSL Network Interface
Map Exchange (Map Xchng) Menu
5-14
SLIP Rate
Sets the baud rate for the Chain-In port when used as the
SLIP connection for SNMP management.
Choices: 1200, 2400, 4800, 9600, 19200, 38400
SLIP Flow CTL
Used to activate flow control on the Chain-In port when used
as the SLIP interface. Hardware mode uses RTS and CTS.
Choices: None, Hardware
Proxy Traps
Enables or disables the transmission of trap messages from
units being "proxied" for.
Choices: Enable, Disable
External Alarms
Allows the external alarm relay to be enabled or disabled. If
enabled and an alarm occurs, may be disabled to deactivate
the alarm relay.
The Map Exchange menu enables and sets the automatic
time-of-day map switch. The unit provides selection of the
hour, minute, and seconds for the map switching to take
place.
The menu items are:
OFF
Indicates the map in use does not change (disabled).
disables the Automatic Map Change feature.
Off
Press
to activate the selection.
Enter
TSU 610 User Manual
61200610L2-1
Advertisement
Table of Contents
