Table of Contents
Advertisement
Chapter 4. T1 Network Interface
SNMP Trap Community
4-36
This community name is used for all SNMP traps forwarded
by the TSU 610. Traps received from daisy-chained units
have a period and the Unit ID appended to the trap
community name.
SNMP Trap Destination Address
The SNMP Trap Destination addresses are listed below:
Host 1 Trap IP Address
This is the first of four entries for SNMP trap destination
addresses.
The TSU 610 forwards all SNMP traps to the IP address
specified in this entry. If the address is set to the default value
of 0.0.0.0, no traps are forwarded for this particular value.
Host 2 Trap IP Address
Defaults to 0.0.0.0. Second destination address for SNMP
traps.
Host 3 Trap IP Address
Defaults to 0.0.0.0. Third destination address for SNMP traps.
Host 4 Trap IP Address
Defaults to 0.0.0.0. Fourth destination address for SNMP
traps.
System Name
A text string that can uniquely identify an SNMP-managed
node.
System Contact
A text string containing the name, phone number, etc. of the
individual responsible for maintaining an SNMP-managed
node.
System Location
A text string describing the physical location of an SNMP-
managed node (for example, SECOND FLOOR PBX ROOM).
TSU 610 User Manual
61200610L2-1
Advertisement
Table of Contents
