Procedures; Departures, Arrivals, And Approaches (Mfd) - Garmin G1000 Pilot's Manual

5.19 PROCEDURES

If any portion of an arrival procedure is the active leg of a flight plan, the existing arrival procedure
NOTE:
must be deleted before changing to a different arrival procedure.

DEPARTURES, ARRIVALS, AND APPROACHES (MFD)

DEPARTURE OPERATIONS
Loading and activating a departure procedure:
1) Press the PROC Key. The Procedures Window is displayed (Figure 5-87).
2) Highlight 'SELECT DEPARTURE'.
3) Press the ENT Key. The DEPARTURE window is displayed on the 'PROC – DEPARTURE LOADING Page.
4) Select a departure.
5) Press the ENT Key. The RUNWAY window may be displayed.
6) Select a runway.
7) Press the ENT Key. The TRANSITION window may be displayed.
8) Select a transition.
9) Press the ENT Key.
10) With 'LOAD' highlighted, press the ENT Key. The departure procedure is displayed as part of the overall flight
plan and is placed in front of the enroute flight plan.
11) Highlight the desired transition waypoint.
190-00590-00 Rev. C
Options
Arrival Loaded in Active
Flight Plan
Departure Procedure
Loaded in Active Flight
Plan
Figure 5-87 Procedures Window
Garmin G1000 Pilot's Guide for the Quest Kodiak 100
GPS NAVIGATION
Approach Procedure
Loaded in Active Flight
Plan
5-101