Garmin G1000 Pilot's Manual
  1. Manuals
  2. Brands
  3. Garmin Manuals
  4. GPS
  5. Cessna Caravan G1000
  6. Pilot's manual

Garmin G1000 Pilot's Manual

Multi function display
Hide thumbs Also See for G1000:
Table of Contents

Advertisement

Quick Links

See also: Reference Manual , Pilot's Manual
G1000
G1000
multi function display
pilot's guide for the Diamond DA40
TM
TM

Advertisement

Table of Contents
loading

Related Manuals for Garmin G1000

Summary of Contents for Garmin G1000

  • Page 1 G1000 G1000 multi function display pilot’s guide for the Diamond DA40...
  • Page 2 Record of Revisions Revision Date of Revision Revision Page Range Description Rev. A 06/28/05 ------------ Initial Release Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 3 MFD power up is part of the system power up proce- This G1000 Pilot’ s Guide describes dure. See the G1000 System Overview Pilot’ s Guide for Multi Function Display (MFD) as installed in details. Diamond DA40, DA40F, and DA40D aircraft. Splash Screen Information DESCRIPTION...
  • Page 4 ENGINE and MAP top level softkeys. DCLTR (declutter) – pressing the DCLTR softkey removes map information in three levels. CHKLIST (checklist) – pressing the CHKLIST softkey displays the Checklist Page. Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 5 As an item is selected, the next item is automatically highlighted for selection. 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40...
  • Page 6 Page and return to the last page that was displayed before the Checklist Page was selected. Checklist Group Checklist Number Checklist Page Checklist Page Indicator Softkeys Figure 8.1.2 Checklist Page (typical) Emergency Softkey Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 7 RST FUEL BACK DONE ENGINE EXIT EMERGCY DA 40 TDI (Diesel) Engine softkey differences ENGINE SYSTEM FUEL ENGINE DCLTR CHKLIST DEC FUEL INC FUEL RST FUEL Figure 8.1.3 MFD Softkeys 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40...

  • Page 8: Table Of Contents

    Nearest Intersections Page Page Group Active Page Title Nearest NDB Page Nearest VOR Page Nearest User Waypoints Page Nearest Frequencies Page Figure 8.1.5 Page Title Window Neatest Airspaces Page Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 9 FMS knob to scroll through the list to identify them. In all cases, once the menu is displayed the Much of the operation of the G1000 MFD is small or large FMS knob is turned to highlight an item accomplished using a menu interface.
  • Page 10 INTRODUCTION This page intentionally left blank. Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...

  • Page 11: Map (Map)

    (labels) Map Orientation Airspace Boundries Interstate Course Line Highways Own Aircraft Terrain Scale Map Scale Legend Page Groups Figure 8.2.1 Navigation Map Page (not all features shown) 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40...
  • Page 12 MAP – NAVIGATION MAP. In addition to turning the large and small FMS knobs, the Navigation Map Page can be selected from any page by pressing and momentarily holding the CLR (DFLT MAP) key. 8-10 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 13 Changing the Map Orientation Map Range See the map setup section of this MFD Pilot’ s Guide for Indicator instructions on how to change the map orientation. Figure 8.2.2 Map Range 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-11...
  • Page 14 ICAO control area Navigation Map Page. Class B, Alert area Caution area, Danger area, Prohibited area Restricted area, Training area Unknown area, Warning area Terminal Zone Airspace (ATZ), Class D 8-12 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 15 SUA Group 5 Traffic Symbols Local Roads SUA Group 6 Traffic Labels Local Road Labels SUA Group 7 Railroads Obstacles Major Political Boundaries Table 8.2.1 Map Declutter Levels 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-13...
  • Page 16 To remove the panning arrow and return to the present position, push in the joystick. 8-14 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 17 NAVIGATION MAP PAGE Distance, Latitude and longitude bearing position of pointer and elevation Panning Arrow Figure 8.2.3 Map Panning 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-15...
  • Page 18 On-screen map maximum elevation On-screen map minimum elevation Aircraft altitude Maximum Ground elevation Minimum Figure 8.2.4 Topography Range 8-16 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 19 Terrain data can be displayed on the Navigation volume. The G1000 displays up to eight traffic targets Map Page by pressing the TERRAIN softkey. Terrain within a 7.5 nautical mile radius, from 3,000 feet below to symbology (mountain icons) appear next to the map 3,500 feet above the requesting aircraft.
  • Page 20 Navigation Map Page menu. To display the menu, press the MENU key (with the Navigation Map Page displayed). Two options are available: Map Setup, and Measure Bearing/Distance. 8-18 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 21 NOTE: The Navigation Map Page orientation orientation and press the ENT key. default setting is ‘North Up’. Press the FMS knob to return to the Navigation Map Page. 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-19...
  • Page 22 ENT key. and press the ENT key. Press the FMS knob to return to the Navigation Press the FMS knob to return to the Navigation Map Page. Map Page. 8-20 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 23 ‘Off’. Press the ENT key to accept the selected option. option. Press the FMS knob to return to the Navigation Press the FMS knob to return to the Navigation Map Page. Map Page. 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-21...
  • Page 24 NOTE: When topographic data is removed from the Navigation Map Page, all cartographic data is automatically removed and the Jeppesen Nav data is presented on a black background. 8-22 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 25 FMS knob to display the range list. Turn the small FMS knob to select the desired range and press the ENT key. Press the FMS knob to return to the Navigation Map Page. 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-23...
  • Page 26 FMS knob to enter a time Map Page (00:00 to 23:59; hours:minutes). The default setting is 00:45 minutes. Press the ENT key. Press the FMS knob to return to the Navigation Map Page. 8-24 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 27 PAs are defined as traffic within the 4.0 nm Figure 8.2.6 Traffic Group Options range, within ± 1200 ft. of altitude separation, and are not traffic advisories (TAs). 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-25...
  • Page 28 Press the ENT key to accept the selected option. option. Press the FMS knob to return to the Navigation Press the FMS knob to return to the Navigation Map Page. Map Page. 8-26 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 29 flight plan names appear on the display (none, small, medium, and large). The zoom range sets the maximum range at which active flight plan waypoints appear on the display (off - 2000 nm). 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-27...
  • Page 30 Press the FMS knob to return to the Navigation • TFR; (only present when GDL 69 is installed): off Map Page. - 2000 nm Figure 8.2.7 Aviation Group Options 8-28 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 31 • FREEWAY: off - 800 nm • NATIONAL HWY: off - 80 nm • LOCAL HWY: off - 30 nm • LOCAL ROAD: off - 15 nm • RAILROAD: off - 30 nm 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-29...
  • Page 32 Turn the small FMS knob to select the desired text size. Press the ENT key to accept the selected option Press the FMS knob to return to the Navigation Map Page. 8-30 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 33 Elevation at the current position is also displayed. To exit the Measure Bearing/Distance option, push in the joystick or select ‘Stop Measuring’ from the page menu options. 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-31...
  • Page 34 NAVIGATION MAP PAGE Bearing, Pointer Distance, and Latitude and Elevation Longitude Information Reference Pointer Figure 8.2.9 Measuring Bearing and Distance 8-32 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...

  • Page 35: Traffic Map Page

    TA OFF Range, TRFC RMVD, TRFC FAIL, NO TRFC DATA, TRFC UNAVAIL, TRAFFIC) Traffic Mode Map Range Traffic, Out of Range Own Aircraft Proximate, Known Altitude Traffic Figure 8.3.1 Traffic Map Page 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-33...
  • Page 36 If TAS is configured (optional) its traffic NOTE: See Appendix F for traffic symbol descrip- data is used. If TIS is configured, its traffic data tions. is displayed. 8-34 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 37 The G1000 displays ‘OPERATE’ in the upper left hand corner TIS Audio Alert of the display and begins to display traffic on the Traffic A TIS audio alert is generated whenever the number or Map Page.
  • Page 38 The pilot should be aware that the quality of displayed traffic is reduced in this condition. 8-36 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...

  • Page 39: 8.4 Terrain Proximity Page

    ‘HDG Up’ map data unless there is no valid heading Page Orientation Obstacles Range Marking Ring Current Aircraft Location Terrain Range View Selection Figure 8.4.1 Terrain Proximity Page 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-37...
  • Page 40 Press the MENU key. The page menu is displayed with ‘View Arc’ or ‘View 360º’ highlighted. Press the ENT key on the desired selection. Aircraft Altitude 100' Threshold 1000' AGL Figure 8.4.2 Terrain Scale 8-38 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 41 Map Page based on the selection of each as summa- tion throughout the world. Obstacles are displayed rized in the table below: in three levels. The G1000 will adjust colors on the Terrain Proximity Page automatically as the aircraft TERRAIN...
  • Page 42 TERRAIN PROXIMITY PAGE This page intentionally left blank. 8-40 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 43 field high- of setting a course to a destination waypoint. Once a lighted. Direct-to is activated, the G1000 establishes a point-to- Turn the small FMS knob to enter the first letter point course line from the present position to the selected of the destination waypoint identifier.
  • Page 44 FMS knob can be used to scroll backwards if during the selection process. the desired waypoint was passed up. Press the ENT key to confirm the selected waypoint, and ENT again to activate a Direct- 8-42 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 45 Press the ENT key to confirm the selected waypoint, and ENT again to activate a Direct- Figure 8.5.2 Flight Plan Waypoint Direct-to 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-43...
  • Page 46 MFD map panning pointer. • The highlighted waypoint identifier field on any page. • The airport waypoint page airport when on the airport information, arrival, departure, or approach pages. 8-44 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 47 Specifying a Course to a Waypoint Once a Direct-to is activated, the G1000 provides During a Direct-to, the G1000 sets a direct great circle navigation guidance to the selected destination until the course to the selected destination. The course to the Direct-to is either replaced with a new Direct-to or flight...
  • Page 48 DIRECT-TO NAVIGATION This page intentionally left blank. 8-46 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 49 8.6 FLIGHT PLANS The data fields are user-selectable and can be changed to display the following: The G1000 can create up to 99 different flight plans • Cumulative Distance (CUM) with up to 31 waypoints in each flight plan. The flight •...
  • Page 50 Repeat step number 4 to enter the identifier for each additional flight plan waypoint. Once all waypoints have been entered, press the FMS knob to return to the Flight Plan Catalog Page. 8-48 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 51 ‘CANCEL’ and press the ENT key. Once all changes have been made, press the FMS knob to return to the Flight Plan Catalog Page. Figure 8.6.3 Activate Flight Plan Leg Confirmation 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-49...
  • Page 52 With ‘OK’ highlighted, press the ENT key to When storing flight plans with an approach, departure store the flight plan. or arrival, the G1000 uses the waypoint information from the current database to define the waypoints. If the da- tabase is changed or updated, the G1000 automatically updates the information if the procedure has not been modified.
  • Page 53 flight plan. FMS knob to return to the Flight Plan Page. Figure 8.6.7 Remove Waypoint Confirmation Figure 8.6.5 Invert Flight Plan Figure 8.6.6 Invert Flight Plan Confirmation 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-51...
  • Page 54 MENU key to display the Active Flight Plan Page flight plan. It also replaces the current departure with a options. new selection. When using a Direct-to, the G1000 uses the nearest airport as a reference when displaying available Highlight ‘Load Departure’ from the list and departures.
  • Page 55 With ‘LOAD’ highlighted, press the ENT key. The arrival flight plan is displayed as part of the overall flight plan and is placed after the enroute flight plan. 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-53...
  • Page 56 Turn the large FMS knob to highlight ‘Load? or Activate?’ and press the ENT key. ‘Load’ adds the approach to the flight plan without immediately using the approach for navigation guidance. 8-54 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 57 ‘LOAD’ and press the ENT key. The name for the new user waypoint is derived from the identifier of the reference waypoint. Figure 8.6.11 Removing an Approach 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-55...
  • Page 58 Plan Page options window. window. Turn the large FMS knob to highlight ‘Restore With “OK” highlighted, press ENT to remove Defaults’ and press the ENT key. the selected waypoint. 8-56 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 59 Flight Plan Catalog Page. Flight Plans in Memory Flight Plan List Figure 8.6.13 Flight Plan Catalog Page Options Flight Plan Information Figure 8.6.12 Flight Plan Catalog Page 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-57...
  • Page 60 flight plan activation, turn the large FMS knob to highlight ‘CANCEL’ and press the ENT key. Figure 8.6.15 Delete Flight Plan Confirmation Figure 8.6.14 Activate Stored Flight Plan Confirmation 8-58 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 61 Once all waypoints have been entered, press operation, turn the large FMS knob to highlight the FMS knob to return to the Flight Plan ‘CANCEL’ and press the ENT key. Catalog Page. 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-59...
  • Page 62 With ‘OK’ highlighted, press the ENT key to delete the flight plan. To cancel, turn the large FMS knob to highlight ‘CANCEL’ and press the ENT key. 8-60 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 63 FMS knob to return to the Flight Plan Catalog By Number’ or ‘Sort List By Comment’ and Page. press the ENT key. This will change flight plan ordering. 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-61...
  • Page 64 (it will become visually enhanced when it is properly pointed to), and press the LD WPT softkey. Existing user waypoints are inserted in the same manner. 8-62 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 65 Select the Vertical Navigation Page. NOTE: VNAV has no effect on KAP140 Autopilot Press the FMS knob to activate the cursor. operation. Figure 8.6.16 Vertical Navigation (VNAV) Page 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-63...
  • Page 66 Menu Options. To display the page menu, press the MENU key (with the VNAV Page displayed). The VNAV Page Options Menu also allows the pilot to restore VNAV page defaults. 8-64 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 67 (AIM) regarding the use of GPS. the pilot will receive vectors to the final course segment of the approach and will provide navi- gation guidance on the final approach segment and extension only. 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-65...
  • Page 68 APPROACHES drawn on the map and are shown in the flight plan. The G1000 supports all ARINC 424 leg types that have associated waypoint fixes. The G1000 uses the following NOTE: The pilot is responsible for determining leg types as part of the Jeppesen database: database currency for approaches.
  • Page 69 Turn the FMS knob to select the desired transi- tion and press the ENT key. ‘LOAD?’ is now highlighted. Press the ENT key. Activate the approach once the approach clearance is received. 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-67...
  • Page 70 ‘Activate Vector-To-Final’ – which makes the inbound course to the FAF waypoint active. Otherwise, activate the full approach using the ‘Activate Approach?’ option. Figure 8.7.3 Selecting an Approach Transition 8-68 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 71 CAUTION: The G1000 is designed to only complement printed approach plates and vastly the G1000 supports. improve situational awareness throughout the approach. The approach must be flown as it appears on the approach chart. 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-69...
  • Page 72 PROCEDURES This page intentionally left blank. 8-70 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 73 • NDB Information Page • VOR Information Page • User Waypoint Information Page Waypoint Identifier Airport Runway Information Field Airport Frequency Information Field Figure 8.8.1 Airport Information Page 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-71...

  • Page 74: Airport Information Page

    FMS knob during the selection process. If duplicate entries exist for an entered identifier, a duplicate waypoint page is displayed once you select the identifier (by pressing the ENT key). 8-72 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 75 Turn the large FMS knob to select the desired Figure 8.8.2 Waypoint Facility or City Location waypoint and press the ENT key. To remove the flashing cursor, press the FMS knob. 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-73...
  • Page 76 Continue turning the small FMS knob to select the desired runway. To remove the flashing cursor, press the FMS knob. Figure 8.8.3 Runway Information Field 8-74 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 77 • ‘TX’ – transmit only RX - receive only • ‘PT’ – part time frequency • ‘i’ – additional information exists, press the ENT 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-75...
  • Page 78 • Helicopter • Multicom • Pre-taxi • Radar • Ramp • Other • Tower • Unicom Navigation Frequencies: • ILS • LOC Figure 8.8.5 Airport Information Page Menu 8-76 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 79 FMS knob to select the desired transition. Press the ENT key. To remove the flashing cursor, press the FMS knob. Figure 8.8.6 Departure Page Menu 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-77...
  • Page 80 Turn the small FMS knob to display a window of available runways. Continue turning the small or large knob to select the desired runway. Press the ENT key. To remove the flashing cursor, press the FMS knob. 8-78 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 81 Direct-to key, then press ENT to highlight the ‘Activate’ prompt (note that any loaded arrival waypoint may be selected). Press ENT again to confirm activate 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-79...
  • Page 82 final course segment of the approach. Press the ENT key. NOTE: the cursor moves through the remaining fields but they are not selectable. To remove the flashing cursor, press the FMS knob. 8-80 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 83 NOTE: To load and activate an approach from the Approach Information page, follow the steps above, but select ‘Load and Activate’ in step 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-81...

  • Page 84: Intersection Information Page

    MGRS or UTM/UPS • Nearest VOR/VORTAC/VOR/DME (identifier, symbol, bearing, distance) Intersection Name and Symbol General Location Intersection Lat/Lon Nearest VOR; identifier, symbol, bearing,distance Selected Intersection Figure 8.8.9 Intersection Information Page 8-82 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 85 ‘WPT’ is displayed in the page group icon located in the lower right corner of the display. Turn the small FMS knob to select the Intersec- tion Information Page. 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-83...

  • Page 86: Ndb Information Page

    NDB Identifier NDB Symbol Name Closest City General Location Magnetic Variation NDB Frequency NDB Symbol Nearest Airport; identifier, symbol, bearing,distance Map of Surrounding Area Figure 8.8.10 NDB Information Page 8-84 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 87 Turn the small and large FMS knobs to enter a name for the identifier and press the ENT key. Press the FMS knob to remove the flashing cursor. 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-85...
  • Page 88 Press the ENT key. Turn the small FMS knob Figure 8.8.11 NDB Page Menu to select an NDB from the list and press the ENTER key.The selected NDB is now the active user NDB. 8-86 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...

  • Page 89: Vor Information Page

    Name Closest City Magnetic VOR Type Variation General Location Latitude/Longitude VOR Frequency VOR Symbol Nearest Airport; identifier, symbol, bearing,distance Map of Surrounding Area Figure 8.8.12 VOR Information Page 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-87...
  • Page 90 Turn the small and large FMS knobs to enter a name for the identifier and press the ENT key. Press the FMS knob to remove the flashing cursor. 8-88 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 91 Press the ENT key. Turn the small FMS knob to select a VOR from the list and press the ENT key. The selected VOR is now the active user VOR. 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-89...

  • Page 92: User Waypoint Information Page

    WAYPOINT PAGE GROUP USER WAYPOINT INFORMATION PAGE The G1000 allows the storage of up to 1,000 user- defined waypoints. The User Waypoint Information Page displays the waypoint name (up to six characters long), identifier and radial from two reference waypoints, distance from one reference waypoint, along with the user waypoints latitude/longitude position.
  • Page 93 ‘WPT’ is displayed in the page group icon located in the lower right corner of the display. Turn the small FMS knob to select the User Waypoint Information Page. 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-91...
  • Page 94 Press the ENT key to Press the FMS knob to remove the flashing accept the selected distance. cursor. Press the FMS knob to remove the flashing cursor. 8-92 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 95 FMS knobs to enter the radial from the reference waypoint to the new user waypoint. Press the ENT key to accept the selected radial. 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-93...
  • Page 96 Press the ENT key to accept the selected distance. Press the FMS knob to remove the flashing cursor. 8-94 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 97 FMS knob to select a waypoint from the list and press the ENT key. The selected waypoint is now the active user waypoint. Figure 8.8.15 User WPT Page Menu 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-95...
  • Page 98 1 waypoint radial and a reference 2 waypoint radial • BLANK - if no reference waypoints are near the user waypoints position 8-96 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 99 Press ‘YES’ to user waypoint. Press the ENT key to accept the rename the new user waypoint. selected radial. Press the FMS knob to remove the flashing cursor. 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-97...
  • Page 100 WAYPOINT PAGE GROUP This page intentionally left blank. 8-98 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...

  • Page 101: Auxiliary (Aux)

    • System Status statistics, and other statistics for a specified Direct-to, point-to-point, or flight plan based on automatic or man- ual input of data. Figure 8.9.1 Trip Planning Page 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-99...
  • Page 102 • ETA — Estimated time of arrival FMS knobs to enter the identifier of the ‘to’ • Sunrise/Sunset times at the destination waypoint and press the ENT key to accept the waypoint. OR, 8-100 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 103 Again, turn the small and large FMS knobs to enter the identifier of the ‘to’ waypoint and press the ENT key to accept the waypoint. OR, 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-101...
  • Page 104 PFD. Turn the small and large FMS knobs to enter the temperature. Press the ENT key when finished. 8-102 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...

  • Page 105: Utility Page

    AUXILIARY PAGE GROUP Utility Page The Utility Page displays timers, trip statistics, and scheduler information for flight planning purposes. Figure 8.9.3 Utility Page Figure 8.9.4 Utility Page Menu 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-103...
  • Page 106 Turn the small FMS knob to display the selection window. Turn the small or large FMS knob to select either PWR-ON or GS>30KT and press the ENT key. 8-104 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 107 Turn the small and large FMS knobs to enter allowed. One-time messages appear once the timer expires the desired time and press the ENT key. and reappear each time the G1000 is powered on, until the message is deleted. Periodic messages automatically To enter a date: reset to the original timer value, once the message is Select the AUX Utility Page.

  • Page 108: Gps Status Page

    AUXILIARY PAGE GROUP GPS STATUS PAGE The GPS Status Page provides a visual reference of GPS receiver functions: Figure 8.9.5 GPS Status Page Figure 8.9.6 GPS Status Page Menu 8-106 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 109 GPS sub-system status situations: Once the GPS receiver has determined your position, the ‘2D NAV’, when only 2-dimensional position is G1000 indicates your position, altitude, track and ground available speed. The GPS receiver status field also displays the ‘3D NAV’, when 3-dimensional position is avail-...
  • Page 110 0.0 to 9.9. The lowest numbers are the best accuracy and the highest numbers are the worst. EPE uses DOP and other factors to calculate a horizontal position error, in feet or meters. 8-108 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 111 RAIM is not available. The waypoint, time, and date G1000 automatically monitors RAIM and warns you with • ‘RAIM NOT AVAILABLE’ if RAIM is predicted an alert message when it is not available. If RAIM is not to be unavailable for the given combination of available when crossing the FAF, the pilot must fly the...
  • Page 112 AUXILIARY PAGE GROUP Figure 8.9.7 RAIM 8-110 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 113 • Checkered signal strength bars - the receiver has excluded the satellite (FDE). Figure 8.9.8 GPS Signal Strength 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-111...

  • Page 114: System Setup Page

    • Arrival Alert • Audio Alerts • MFD Data Bar Fields • GPS CDI Range Adjustments • COM Transceiver Channel Spacing. • Nearest Airport Parameters Figure 8.9.9 System Setup Page 8-112 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 115 ENT key. the desired pilot profile. 10. The cursor moves to the CREATE field. Press Press the ENT key. The G1000 loads and the ENT key to create a profile. To cancel the displays the system settings for the selected profile, turn the large FMS knob to highlight...
  • Page 116 CANCEL and pressing the ENT key. press the ENT key. You also have the option of canceling the renaming request by highlighting CANCEL and pressing the ENT key. 8-114 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 117 84. If you are using a chart based on another datum, you Turn the small or large FMS knob to select the should set the G1000 to use the same datum. Using a map desired system time format (local 12hr, local datum that does not match the charts you are using can 24hr, UTC).
  • Page 118 The Map Datum section of the System Setup Page allows selection of map datums to be used by the G1000 from a • To select a Nav Angle (auto, true) list of datums available in the current aviation database •...
  • Page 119 • Class B TMA airspace alert setting • Class C TCA airspace alert setting • Class D • Restricted airspace alert setting • MOA • Other airspace alert settings • Altitude buffer distance setting 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-117...
  • Page 120 “Arrival at [waypoint]”message is displayed on Turn the small and large FMS knobs to enter a the PFD Navigation Status Bar. trigger distance and press the ENT key. 8-118 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 121 MFD data bar field. Turn the small FMS knob to display the options list. Turn the small or large FMS knobs to highlight the new selection. Press the ENT key. 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-119...
  • Page 122 ANY phase of flight. For example, if 1.0 nm is selected, Turn the small or large FMS knob to select the the G1000 uses this for en-route and terminal phases desired value and press the ENT key. and ramp down to 0.3 nm during an approach. Note that...
  • Page 123 Turn the large FMS knob to highlight ‘RNWY SURFACE’ field in the ‘NEAREST APT’ box. Turn the small FMS knob to display the options list for the selected item. 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-121...

  • Page 124: System Status Page

    LRUs are indicated by a red X. The Pilot should note the failed LRU and inform a Diamond service center or Garmin dealer. Figure 8.9.10 System Status Page 8-122 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...

  • Page 125: Nearest (Nrst)

    The scroll bar along the right-hand side of NRST Page. the page indicates the part of the list that is currently being viewed. Press the FMS knob to remove the flashing cursor. 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-123...
  • Page 126 Airport Identifier, Symbol, Bearing, Distance Airport Name, Closest City, Elevation Runway Information Airport COM frequencies Approaches Nearest Airport Figure 8.10.1 Nearest Airports Page 8-124 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 127 NEAREST PAGE GROUP Direct To Page Figure 8.10.2 Direct-to from Nearest Airports Page 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-125...

  • Page 128: Nearest Airports Page

    Turn the small FMS knob to select the Nearest Airports Page. Figure 8.10.3 APT, RNWY, FREQ, and APR Softkeys 8-126 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 129 field highlighted.Turn either the small or large FMS knob to select the desired transition. Press the ENT key. The ‘LOAD?’ field is highlighted. Press the ENT key to load the approach. 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-127...

  • Page 130: Nearest Intersections Page

    • Frequency • Bearing • Distance Intersection Identifier, Symbol, Bearing, Distance Latitude and Longitude VOR Name, Symbol, Fre- Nearest quency, Bearing, Intersection Distance Symbol Figure 8.10.4 Nearest Intersections Page 8-128 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...

  • Page 131: Nearest Ndb Page

    Page pertains to the selected intersection Nearest NDB Map NDB Identifier, Symbology Symbol, Bearing, Distance NDB Name NDB Location Latitude and Longitude Frequency Figure 8.10.5 Nearest NDB Page 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-129...

  • Page 132: Nearest Vor Page

    VOR Identifier, Nearest Symbol, Bearing, VOR Map Distance Symbology VOR Name VOR Location VOR Type and Magnetic Deviation Latitude and Longitude VOR Frequency Figure 8.10.6 Nearest VOR Page 8-130 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 133 Method 2: Press the MENU key. Select the Select VOR Window option and press the ENT key. Turn either the small or large FMS knob to select a VOR. 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-131...

  • Page 134: Nearest User Waypoints Page

    • A second reference waypoint with identifier and bearing Nearest User Waypoint Identifier, Symbol, Bearing, Distance Nearest User Waypoint Reference Waypoint Information Reference Waypoint, Bearing, and Distance Figure 8.10.7 Nearest User Waypoints Page 8-132 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...

  • Page 135: Nearest Frequencies Page

    ARTCC and FSS information, the Nearest Frequencies ENT key to load the center frequency into the Page includes the weather frequencies for the selected COM frequency standby field. ARTCC or FSS. 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-133...
  • Page 136 Press the FSS softkey and turn the large FMS knob to select the ‘FSS’ frequency field. Press the ENT key to load the ‘FSS’ frequency into the ‘COM’ frequency standby field. 8-134 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 137 Turn the small FMS knob to select the Nearest • Airspace and Agency Airspaces Page. • Vertical Limits (floor/ceiling) • Airspace Frequencies Airspace Alerts Airspace and Agency Vertical Limits Airspace Frequencies Figure 8.10.9 Nearest Airspaces Page 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-135...
  • Page 138 Press the ENT key to load the System Setup Page (Auxiliary Page Group). frequency into the ‘COM’ frequency standby field 8-136 Garmin G1000 MFD Pilot’s Guide for the DA40 190-00381-03 Rev. A...
  • Page 139 Auxiliary Page Group. An altitude buffer is also provided • TRSA on the System Setup Page to provide an extra margin of • Unspecified safety above/below the published limits. • Warning 190-00381-03 Rev. A Garmin G1000 MFD Pilot’s Guide for the DA40 8-137...
  • Page 140 Unit 5, The Quadrangle Abbey Park Industrial Estate Romsey, SO51 9DL, U.K. p: 44/0870.8501241 f: 44/0870.8501251 Garmin Corporation No. 68, Jangshu 2nd Road Shijr, Taipei County, Taiwan p: 886/2.2642.9199 f: 886/2.2642.9099 www.garmin.com © 2005 Garmin Ltd. or its subsidiaries 190-00381-03 Rev. A...

Table of Contents