Garmin G1000 Pilot's Manual page 71

1
Torque Gauge
(TRQ FT-LB)
2
Interstage Turbine
Temperature Gauge
(ITT °C)
3
Propeller Speed Gauge
(NP RPM)
4
Generator Speed Gauge
(NG %)
5
Fuel Flow
(FFLOW PPH)
6 Oil Pressure Indicator
(OIL PRES)
7
Oil Temperature Indicator
(OIL °C)
8
Ammeter
(AMPS)
9
Voltmeter
(VOLTS)
10
Fuel Quantity Indicator
(FUEL QTY)
11
Aileron and Rudder Trim
Bars (AIL, RUD)
12
Elevator Trim Bar
(ELEV)
13
Flap Position Indicator
(FLAPS)
Engine Start
190-00590-00 Rev. C
Displays engine torque in foot-pounds (ft-lb)
Caution and warning ranges are propeller speed sensitive and change for
speeds greater than 2000 rpm.
Displays Interstage Turbine Temperature (ITT) in degrees Celsius (°C)
Operating ranges differ for engine off and start conditions (see Figure 3-3).
When the starter is engaged, 'STRT' is annunciated above the temperature
readout. When the engine is off or in the process of being shut down,
'OFF' is annunciated.
Displays propeller speed in revolutions per minute (rpm)
Displays gas generator speed as a percentage
Displays current fuel flow in pounds per hour (pph)
Displays engine oil pressure in pounds per square inch (psi)
Displays engine oil temperature in °C
Displays DC current in amperes (amps) for the generator (G) and the
alternator (A)
Displays DC bus voltages
Displays quantities of fuel in pounds (lb) in the left (L) and right (R) tanks
Aileron and rudder trim are indicated with pointers along slide bars; the
white bars indicate takeoff trim positions
Elevator trim is indicated with a pointer along a slide bar; takeoff trim position
is indicated with a white bar and T/O label
Flap deflection is indicated with a pointer along a color-coded slide bar
Figure 3-3 Interstage Turbine Temperature Gauge Status Annunciations
Garmin G1000 Pilot's Guide for the Quest Kodiak 100
ENGINE INDICATION SYSTEM
Normal Engine Off
3-3