Garmin G1000 Pilot's Manual page 231

ACTIVATE APPROACH
'ACTIVATE APPROACH' activates the approach.
Activating the approach for a direct-to or flight plan destination airport:
1) From the active flight plan window, press the PROC Key to display the Procedures Window.
2) Highlight 'ACTIVATE APPROACH'.
3) Press the ENT Key.
ACTIVATE VECTOR-TO-FINAL
'ACTIVATE VECTOR-TO-FINAL' allows the pilot to select vectors to the final approach course.
Activating the approach with vectors to final:
1) From an active flight plan, press the PROC Key to display the Procedures Options Window.
2) Highlight 'ACTIVATE VECTOR-TO-FINAL'.
3) Press the ENT Key.
190-00590-00 Rev. C
Figure 5-97 Activate Approach Selection
Figure 5-98 Activate Vector-To-Final Selection
Garmin G1000 Pilot's Guide for the Quest Kodiak 100
GPS NAVIGATION
5-115