Garmin G1000 Pilot's Manual page 60

FLIGHT INSTRUMENTS
As the aircraft crosses the missed approach point (MAP), automatic approach waypoint sequencing is
suspended. 'SUSP' appears on the HSI (to the lower right of the aircraft symbol) in place of 'OBS' and the
OBS Softkey label changes to SUSP. Pressing the SUSP Softkey resumes automatic of approach waypoints.
Enabling/disabling OBS Mode while navigating with GPS:
1) Press the OBS Softkey to select OBS Mode.
2) Turn the CRS Knob to select the desired course to/from the waypoint.
3) Press the OBS Softkey again to return to normal operation.
2-16
SUSP Softkey Suspends
Waypoint Sequencing
Figure 2-25 Suspending Automatic Waypoint Sequencing
Garmin G1000 Pilot's Guide for the Quest Kodiak 100
SUSP
Annunciation
190-00590-00 Rev. C