Garmin G1000 Pilot's Manual page 190

GPS NAVIGATION
OR:
1) Press the FPL Key.
2) Turn the small FMS Knob to display the Flight Plan Catalog Page.
3) Press the FMS Knob to activate the cursor.
4) Highlight the desired flight plan.
5) Press the MENU Key.
6) Highlight 'Invert & Activate FPL'.
7) Press the ENT Key. The 'Invert and activate stored flight plan?' window is displayed.
8) With 'OK' highlighted, press the ENT Key. To cancel the operation, highlight 'CANCEL' and press the ENT Key.
Editing a flight plan:
1) From the Flight Plan Catalog Page, press the FMS Knob to activate the cursor.
2) Highlight the desired flight plan.
3) Select the EDIT Softkey.
4) To add a waypoint to the flight plan, select the point in the plan where the new waypoint is to be added. If an
existing waypoint is highlighted, the new waypoint is placed directly in front of this waypoint.
5) Enter the identifier, facility, or city of the new waypoint.
6) Press the ENT Key. The new waypoint now exists in the flight plan.
OR:
1) From the Flight Plan Catalog Page, press the FMS Knob to activate the cursor.
2) Highlight the desired flight plan.
3) Press the ENT Key.
4) To add a waypoint to the flight plan, select the point in the plan where the new waypoint is to be added. If an
existing waypoint is highlighted, the new waypoint is placed directly in front of this waypoint.
5) Enter the identifier, facility, or city of the new waypoint.
6) Press the ENT Key. The new waypoint now exists in the flight plan.
Copying a flight plan to another flight plan catalog location:
1) From the Flight Plan Catalog Page, press the FMS Knob to activate the cursor.
2) Highlight the desired flight plan.
3) Select the COPY Softkey. A 'Copy to flight plan?' confirmation window is displayed.
4) With 'OK' highlighted, press the ENT Key to copy the flight plan. To cancel, highlight 'CANCEL' and press the
ENT Key.
5-74 Garmin G1000 Pilot's Guide for the Quest Kodiak 100 190-00590-00 Rev. C