Outside Air Temperature - Garmin G1000 Pilot's Manual

OUTSIDE AIR TEMPERATURE

The Outside Air Temperature (OAT) is displayed in degrees Celsius (°C) by default in the lower left of the PFD
under normal display conditions, or below the true airspeed in reversionary mode.
Changing temperature display units:
1) Select the AUX - System Setup Page using the FMS Knob.
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight the 'Temp' field.
4) Turn the small FMS Knob to select the desired unit.
5) Press the ENT Key to confirm the selection.
190-00590-00 Rev. C
Normal Display
Figure 2-29 Outside Air Temperature
Figure 2-30 System Setup Page,
Display Units Settings
Garmin G1000 Pilot's Guide for the Quest Kodiak 100
FLIGHT INSTRUMENTS
Reversionary Mode
2-19