Garmin G1000 Pilot's Manual page 307

GIA 63 Message Advisories
Alerts Window Message
GIA1 CONFIG – GIA1 configuration
error. Config service req'd.
GIA2 CONFIG – GIA2 configuration
error. Config service req'd.
GIA1 COOLING – GIA1 temperature
too low.
GIA2 COOLING – GIA2 temperature
too low.
GIA1 COOLING – GIA1 over
temperature.
GIA2 COOLING – GIA2 over
temperature.
GIA1 SERVICE – GIA1 needs service.
Return the unit for repair.
GIA2 SERVICE – GIA2 needs service.
Return the unit for repair.
HW MISMATCH – GIA hardware
mismatch. Communication halted.
MANIFEST – GIA1 software mismatch.
Communication halted.
MANIFEST – GIA2 software mismatch.
Communication halted.
COM1 TEMP – COM1 over temp.
Reducing transmitter power.
COM2 TEMP – COM2 over temp.
Reducing transmitter power.
COM1 SERVICE – COM1 needs
service. Return unit for repair.
COM2 SERVICE – COM2 needs
service. Return unit for repair.
190-00590-00 Rev. C
Comments
The GIA1 and/or GIA2 configuration settings do not match backup configuration
memory. The G1000 system should be serviced.
The GIA1 and/or GIA2 temperature is too low to operate correctly. Allow units to
warm up to operating temperature.
The GIA1 and/or GIA2 temperature is too high. If problem persists, the G1000
system should be serviced.
The GIA1 and/or GIA2 self-test has detected a problem in the unit. The G1000
system should be serviced.
There is a hardware mismatch between GIA1 and GIA2. The G1000 system should
be serviced.
The GIA1 and/or GIA 2 has incorrect software installed. The G1000 system should
be serviced.
The system has detected an over temperature condition in COM1 and/or COM2. The
transmitter will operate at reduced power. If the problem persists, the G1000 system
should be serviced.
The system has detected a failure in COM1 and/or COM2. COM1 and/or COM2 may
still be usable. The G1000 system should be serviced when possible.
Garmin G1000 Pilot's Guide for the Quest Kodiak 100
APPENDIX A
A-11