Garmin G1000 Pilot's Manual page 34

SYSTEM OVERVIEW
P P
ILOT ROFILES
Pilot profile names cannot start with a blank as the first letter in the name.
NOTE:
System settings configured on the System Setup Page may be saved under a pilot profile. The G1000 will
store up to 25 profiles; the currently active profile and amount of memory used and available are shown
at the top of the System Setup Page in the Pilot Profile Box. From this box, pilot profiles may be created,
selected, renamed, or deleted.
Creating a profile:
1) Use the FMS knob to select the System Setup Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight 'CREATE' in the Pilot Profile Box.
4) Press the ENT Key. A 'Create Profile' window is displayed.
5) Enter a profile name up to 16 characters long and press the ENT Key.
6) In the next field, use the small FMS Knob to select the desired settings upon which to base the new profile.
Profiles can be created based on Garmin factory defaults, default profile settings (initially based on Garmin
factory defaults unless edited by the pilot), or current system settings.
7) Press the ENT Key.
8) With 'CREATE' highlighted, press the ENT Key to create the profile
OR :
Use the large FMS Knob to select 'CREATE and ACTIVATE' and press the ENT Key to activate the new profile.
9) To cancel the process, select 'CANCEL' with the large FMS Knob and press the ENT Key.
Selecting an active profile:
1) Use the FMS knob to select the System Setup Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight the active profile field in the Pilot Profile Box.
4) Turn the small FMS Knob to display the pilot profile list and highlight the desired profile.
5) Press the ENT Key. The G1000 loads and displays the system settings for the selected profile.
Renaming a profile:
1) Use the FMS knob to select the System Setup Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight 'RENAME' in the Pilot Profile Box.
4) Press the ENT Key.
5) In the 'Rename Profile' window, turn the FMS Knob to select the profile to rename.
1-24 Garmin G1000 Pilot's Guide for the Quest Kodiak 100 190-00590-00 Rev. C